HIGHWAY MARKETING SDN. BHD.  (496530-A)
Sibu Head Office: No.33, Long Bridge Road, Mini Post Ulu Lanang,  P.O.Box 8042, 96008 Sibu, Sarawak, Malaysia. Tel: +6084-313741, 318081  Fax: +6084-313749
¡@ E-mail: highwaysibu@gmail.com / sales.highwaysibu@gmail.com
Bintulu Branch:
Shoplot 239 (8390), Ground Floor, Bintulu Sentral, Phase 2, Tg. Kidurong,
97000 Bintulu, Sarawak, Malaysia. Tel: +6086-344341 Fax: +6086-344741 
E-mail: highwaybintulu@gmail.com
Miri Branch:
Lot 679, Ground Floor, Jalan Permaisuri, 98000 Miri, Sarawak, Malaysia.
Tel: +6085-434741, 437741 Fax: +6085-427749  E-mail: highwaymiri@gmail.com
+60198899341 HighwaySibu

¡@ ¡@ ¡@
¡@ ¡@

Search by Category

Home
Company Profile
Action socket
AGP Power Tools
Akita Chain Block
Akita Lever Block
Comet High Pressure Cleaner 
Dynatool Hand Tools
Daypower Tools & Machineries
Einhell Power Tools
Hilti Tools
Air Cooler
Kennedy Tools
Kennedy Catalog
Cutting tools
Abrasives & Power Tools
>>  Abrasive Sheet & Coils
>>  Abrasive Sponges
>>  Fibre Backed Disc
>> 

Velcro & Adhesive Backed Disc

>>  Sanding Sheet
>>  Sanding Brands & Cartridge Rolls
>>  Surface Preparation
>>  Carbide/Diamond Burrs
>>  Flap Disc & Flap Wheel
>>  Cutting & Grinding Disc
>>  Grinding Wheel
>>  Jigsaw Blades
>>  Fibre Abrasive
>>  Polishing & Lapping
>>  Mounted Points
>>  Oilstones
>>  Grinding Compounds
>>  Air Products
>>  Bench Grinder
>>  Magnetic Drilling Machine
>>  Air Tools
>>  Machines Tools
>>  Compressor & Generators
>>  Pressure Washer
>>  DIY Power Tools
>>  Water Pump
>>  Industrial Power Tools
>>  Cable Reels Plugs & Sockets
>>  Lighting
>>  Router Cutter
>>  Multi-Tooth Drilling Cutte
>>  Power Tools Chisels
>>  Push-Fit Pneumatic Fittings
>>  Pneumatic Cylinder & Valves
>>  Wire Grinding & Brushes
Precision & Laboratory Equipment
Workshop Equipment
Hand Tools
Lubricants & Chemical Products
Welding
Maintenance & Personal Protection
Sealey Tools & Equipment
Lubricating Equipment
MP Lubricants
Metabo Power Tools
Mega Garage Equipment
Personal Safety Products
Safety Shoes
Welding Machine
Expo Photo
Feed Back Form
New Products
Concept store investment
Our Location
Free Call
¡@

ID: highwaysibu

We are always on line, offer you rapid action and service.

¡@
Introduction & IndexCutting ToolsAbrasives and Power ToolsPrecision & Laboratory EquipmentWorkshop EquipmentHand toolsFastenersLubricants & Chemical ProductsOffice Supplies & StationeryWeldingMaintenance & Personal ProtectionService & Support

¡@

Cutting & Grinding Disc
¡@

Model

Products

Item No & Description

YRK230-4630K
YORK YRK230-4630K 115x1x22.23mm A60TBF INOX CUTTING DISC
Cutting Discs - Inox Type 41 - Flat Reinforced Cutting Flat reinforced cutting discs for use with portable angle grinders. 180mm and 230mm discs can also be used on circular saws. Not to be used for wet cutting. For stainless steel (iron, chlorine and sulphur-free). EN 12413.
YRK230-4610K
YORK YRK230-4610K 100x1x16mm A60TBF INOX CUTTING DISC
Cutting Discs - Inox Type 41 - Flat Reinforced Cutting Flat reinforced cutting discs for use with portable angle grinders. 180mm and 230mm discs can also be used on circular saws. Not to be used for wet cutting. For stainless steel (iron, chlorine and sulphur-free). EN 12413.
YRK202-2110K
YORK YRK202-2110K 4.1/2x1/8x7/8" A30TBF CUTTING DISC
Type 42 Depressed Centre Cutting Grade A30 - For general-purpose use on metals. Grade C24 - For use on stone and non-ferrous materials. Grade R30 - For use on stainless steel. Grade X24 - Special, for use on cast iron. Type 42 Depressed Centre Cutting Manufactured to assure operator safety and op...
KEN230-4430K
KENNEDY KEN230-4430K 115x1x22.23mm AS60 INOX BF CUT-OFF DISC
Inox Cut-Off Discs Type 41 Flat Reinforced Cutting For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. Inox Cut-Off Discs ...
KEN230-4410K
KENNEDY KEN230-4410K 100x1x16mm AS60 INOX BF CUT-OFF DISC
  • Inox Cut-Off Discs Type 41 Flat Reinforced Cutting For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. Inox Cut-Off Discs ...
  • KEN230-4540K
    KENNEDY KEN230-4540K 230x1.9x22.23mm AS46 INOX BF CUT-OFF DISC
    Inox Cut-Off Discs Type 41 Flat Reinforced Cutting For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. Inox Cut-Off Discs ...
    KEN230-2170K
    KENNEDY KEN230-2170K 125x1x22.23mm AS60 INOX BF CUT-OFF DISC
    Inox Cut-Off Discs Type 41 Flat Reinforced Cutting For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. Inox Cut-Off Discs ...
    YRK230-4710K
    YORK YRK230-4710K 230x1.8x22.23mm A36SBF INOX CUTTING DISC
    Cutting Discs - Inox Type 41 - Flat Reinforced Cutting Flat reinforced cutting discs for use with portable angle grinders. 180mm and 230mm discs can also be used on circular saws. Not to be used for wet cutting. For stainless steel (iron, chlorine and sulphur-free). EN 12413.
    YRK230-7080K
    YORK YRK230-7080K 7x1/8x7/8" A30TBF FLAT CUTTING DISC
    3M Industrial Cutting Discs Grade A30 - For general-purpose use on metals. Grade C24 - For use on stone and non-ferrous materials. Grade R30 - For use on stainless steel. Grade X24 - Special, for use on cast iron. Type 41 Flat Reinforced Cutting Manufactured to assureoperator safety and optimum p...
    YRK230-5080K
    YORK YRK230-5080K 4x1/8x5/8" A30RBF FLAT CUTTING DISC
    3M Industrial Cutting Discs Grade A30 - For general-purpose use on metals. Grade C24 - For use on stone and non-ferrous materials. Grade R30 - For use on stainless steel. Grade X24 - Special, for use on cast iron. Type 41 Flat Reinforced Cutting Manufactured to assureoperator safety and optimum p...
    YRK202-1080K
    YORK YRK202-1080K 4.1/2x1/8x7/8" A30TBF CUTTING DISC
    Type 42 Depressed Centre Cutting Grade A30 - For general-purpose use on metals. Grade C24 - For use on stone and non-ferrous materials. Grade R30 - For use on stainless steel. Grade X24 - Special, for use on cast iron. Type 42 Depressed Centre Cutting Manufactured to assure operator safety and op...
    ¡@
    ¡@
    ¡@
    ¡@