HIGHWAY MARKETING SDN. BHD.  (496530-A)
Sibu Head Office: No.33, Long Bridge Road, Mini Post Ulu Lanang,  P.O.Box 8042, 96008 Sibu, Sarawak, Malaysia. Tel: +6084-313741, 318081  Fax: +6084-313749
¡@ E-mail: highwaysibu@gmail.com / sales.highwaysibu@gmail.com
Bintulu Branch:
Shoplot 239 (8390), Ground Floor, Bintulu Sentral, Phase 2, Tg. Kidurong,
97000 Bintulu, Sarawak, Malaysia. Tel: +6086-344341 Fax: +6086-344741 
E-mail: highwaybintulu@gmail.com
Miri Branch:
Lot 679, Ground Floor, Jalan Permaisuri, 98000 Miri, Sarawak, Malaysia.
Tel: +6085-434741, 437741 Fax: +6085-427749  E-mail: highwaymiri@gmail.com
+60198899341 HighwaySibu

¡@ ¡@ ¡@
¡@ ¡@ ¡@ ¡@ ¡@ ¡@

Search by Category

Home
Company Profile
Action socket
AGP Power Tools
Akita Chain Block
Akita Lever Block
Comet High Pressure Cleaner 
Dynatool Hand Tools
Daypower Tools & Machineries
Einhell Power Tools
Hilti Tools
Air Cooler
Kennedy Tools
Kennedy Catalog
Cutting tools
Abrasives & Power Tools
>>  Abrasive Sheet & Coils
>>  Abrasive Sponges
>>  Fibre Backed Disc
>> 

Velcro & Adhesive Backed Disc

>>  Sanding Sheet
>>  Sanding Brands & Cartridge Rolls
>>  Surface Preparation
>>  Carbide/Diamond Burrs
>>  Flap Disc & Flap Wheel
>>  Cutting & Grinding Disc
>>  Grinding Wheel
>>  Jigsaw Blades
>>  Fibre Abrasive
>>  Polishing & Lapping
>>  Mounted Points
>>  Oilstones
>>  Grinding Compounds
>>  Air Products
>>  Bench Grinder
>>  Magnetic Drilling Machine
>>  Air Tools
>>  Machines Tools
>>  Compressor & Generators
>>  Pressure Washer
>>  DIY Power Tools
>>  Water Pump
>>  Industrial Power Tools
>>  Cable Reels Plugs & Sockets
>>  Lighting
>>  Router Cutter
>>  Multi-Tooth Drilling Cutte
>>  Power Tools Chisels
>>  Push-Fit Pneumatic Fittings
>>  Pneumatic Cylinder & Valves
>>  Wire Grinding & Brushes
Precision & Laboratory Equipment
Workshop Equipment
Hand Tools
Lubricants & Chemical Products
Welding
Maintenance & Personal Protection
Sealey Tools & Equipment
MP Lubricants
Metabo Power Tools
Mega Garage Equipment
Personal Safety Products
Safety Shoes
Welding Machine
Expo Photo
Feed Back Form
New Products
Concept store investment
Our Location
¡@
We accept...
Free Call

ID: highwaysibu

We are always on line, offer you rapid action and service.

¡@
Introduction & IndexCutting ToolsAbrasives and Power ToolsPrecision & Laboratory EquipmentWorkshop EquipmentHand toolsFastenersLubricants & Chemical ProductsOffice Supplies & StationeryWeldingMaintenance & Personal ProtectionService & Support

¡@

Air Tools
 21/ 72

 << Prev 1 2 3 4 Next >>

Model

Products

Item No & Description

KBE270-1150K
KOBE KBE270-1150K AIR RIVET NUT TOOL
Kobe™ KHRN01 - Air Rivet Nut Tool KHRN01 Lightweight, high speed tool ideal for flow-line or batch assembly in a variety of applications. Features one-step rocker type trigger, quick and easy stroke adjustment, and left and right hand side air inlet for ease of operational control. Suitable for rivet nut...
KBE270-1200K
KOBE KBE270-1200K FCT076 76mm REVERSIBLE CUT-OFF TOOL
Kobe™ KBE270-1200K 76mm Reversible Cut-Off Tool FCT076 For cutting auto panels, light sheet metal, fibreglass, nuts and bolts. Powerful 0.5HP motor. Speed regulator. Safety release throttle. Rear exhaust. Rotating air inlet. Reverse feature to allow for sparks to be deflected away from the work. Ball bearing ...
KBE270-1375C
KOBE KBE270-1375C DP2210 10mm PISTOL DRILL
Kobe™ KBE270-1375C 10mm Pistol Drill RD375 10mm Jacobs chuck, stall resistant, heavy duty bearings, 1/2" HP motor, 3/8" - 24 spindle thread. Specifications: Air inlet thread: 1/4" NPT. Minimum air hose size (ID): 3/8"(10mm). Chuck capacity: 10mm. Spindle thread: 3/8" - 24. Air pressure: 90PSI/6.3Bar. Ai...
KBE270-1390D
KOBE KBE270-1390D DP2610 10mm HEAVY DUTY PISTOL DRILL
Kobe™ KBE270-1390D Heavy Duty Pistol Drill 10mm DP2610 10mm Jacobs chuck, stall resistant, directional front exhaust, hammer finish casing, needle bearing gears, 3/8" - 24 spindle thread. Air inlet thread: 1/4" NPT. Minimum air hose size (ID): 3/8"(10mm). Chuck capacity: 10mm. Spindle thread: 3/8" - 24. Air pre...
KBE270-1400L
KOBE KBE270-1400L DPR1810 10mm REVERSIBLE PISTOL DRILL
Kobe™ KBE270-1400L Reversible Pistol Air Drill, 10mm DPR1810 10mm Jacobs chuck, stall resistant, heavy-duty bearings, thumb switch for reverse, suitable for screwdriving. Spindle: 3/8"- 24. Air inlet thread: 1/4" NPT. Minimum air hose size (ID): 3/8" (10mm). Chuck capacity: 10mm. Spindle thread: 3/8" - 2...
KEN270-1425M
KOBE KBE270-1425M DAR1510 10mm REVERSIBLE ANGLE DRILL
Kobe™ KBE270-1425M Reversible Angle Air Drill, 10mm DAR1510 10mm Jacobs chuck, fingertip control of reverse, reverse exhaust, overall head height 94mm, 3/8¡¨- 24 spindle thread. Specifications: Air inlet thread: 1/4¡¨ NPT. Chuck capacity: 10mm. Minimum hose size: 3/8¡¨(10mm). Air pressure: 90psi/6.3ba...
KEN270-1450N
KOBE KBE270-1450N DS4510L 10mm STRAIGHT AIR DRILL
Kobe™ KBE270-1450N Straight Air Drill, 10mm DS4510L 10mm Jacobs chuck, stall-resistant, safety lever throttle, high performance, planetary gearing, 3/8" - 24 spindle thread. Specifications: Air inlet thread: 1/4" NPT. Chuck capacity: 10mm. Spindle thread: 3/8" - 24. Minimum air hose size (ID): 3/8"(10m...
KBE270-1500E
KOBE KBE270-1500E DP513 1/2" HEAVY DUTY AIR DRILL
Kobe™ KBE270-1500E Heavy Duty Pistol Drill, 13mm DP513 13mm Jacobs chuck, high reduction gearbox, high torque, with side handle, 1/2hp motor. Air inlet thread: 1/4" NPT. Minimum hose: 3/8" (10mm). Chuck capacity: 13mm. Spindle thread: 3/8" - 24. Air pressure: 90psi/6.3bar. Air consumption: 4cfm*. Sound pressure ...
KBE270-1525F
KOBE KBE270-1525F DPR813 13mm REVERSIBLE HEAVY DUTY PISTOL DRILL
Kobe™ KBE270-1525F Reversible Heavy Duty Pistol Air Drill, 13mm DPR813 13mm Jacobs chuck, thumb switch for reverse, auxiliary handle, suitable for screwdriving, heavy-duty planetary gearing. Air inlet thread: 1/4¡¨ NPT. Minimum hose : 3/8¡¨ (10mm). Chuck capacity: 13mm. Spindle thread: 3/8¡¨ - 24. Air p...
KBE270-1620A
KOBE KBE270-1620A 1" DRIVE H/D PISTOL GRIP AIR IMPACT WRENCH
Kobe™ KBE270-1620A Pistol Grip Air Impact Wrench - 1" IWP100-X Suitable for industrial and commercial production and assembly applications. Front or rear mounting spring balance loop. Forward/reverse switch and three position power regulator. Forward facing exhaust. Oiling points for daily maintenance. Free s...
KBE270-1630B
KOBE KBE270-1630B 1" DRIVE H/D IN-LINE IMPACT WRENCH
Kobe™ KBE270-1630B Heavy-Duty In-Line Air Impact Wrench - 1" IWS100X 1" square drive. Suitable for industrial and commercial production and assembly applications. Side handle for two-handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and three position power regulator. Top v...
KBE270-1960K
KOBE KBE270-1960K FGD 4.1/2" DISC GRINDER C/W SWIVEL GUARD
Kobe™ KBE270-1960K 115 & 125mm Angle Grinder Suitable for metal dressing, rust removal, weld preparation and automotive bodywork fabrication. Rubber-cushioned side handle provides grip and operator comfort. Free speed: 10,000rpm (governed). Spindle thread: M14 x 2.0mm. Air inlet thread: 1/4¡¨ NPT. Min. a...
KBE270-1980K
KOBE KBE270-1980K FGD 5" DISC GRINDER C/W SWIVEL GUARD
Kobe™ KBE270-1980K 115 & 125mm Angle Grinder Suitable for metal dressing, rust removal, weld preparation and automotive bodywork fabrication. Rubber-cushioned side handle provides grip and operator comfort. Free speed: 10,000rpm (governed). Spindle thread: M14 x 2.0mm. Air inlet thread: 1/4¡¨ NPT. Min. a...
KBE270-2020H
KOBE KBE270-2020H GDA2206L ANGLE DIE GRINDER
Kobe™ KBE270-2020H 90¢X Angle Die Grinder GDA2206L Safety lever throttle, reverse exhaust, ideal for polishing, grinding and buffing, suitable for use in confined areas. Free speed: 22,000rpm. Collet size: 6mm. Air inlet thread: 1/4" NPT. Minimum air hose size: 10mm (3/8"). Air pressure: 90psi/6.2bar. A...
KBE270-2024K
KOBE KBE270-2024K GD2206L DIE GRINDER WITH SAFETY THROTTLE
Kobe™ KBE270-2024K Straight Die Grinder GD2206L 1/2hp motor delivers 22,000 precisely controllable rpm in the palm of your hand making it ideally suitable for polishing, buffing and grinding. The robust and durable single piece aluminium body houses the 1/2hp motor and precision balanced bearings provide reli...
KBE270-2030L
KOBE KBE270-2030L GD22LK 6mm AIR DIE GRINDER KIT
Kobe™ KBE270-2030L Die Grinder Kit GD22LK Includes: GD2206L Straight Die Grinder (as shown). With 3 and 6mm collets, 10 assorted mounted points and robust blow moulded case.
KBE270-2035M
KOBE KBE270-2035M GD2806L HIGH SPEED MINI DIE GRINDER
Kobe™ KBE270-2035M High Speed Mini Die Grinder GD2806L For precision engineers' mould making etc. Safety lever throttle, front exhaust, ultra compact and lightweight. Collet size: 6mm. Air inlet thread: 1/4" NPT. Minimum air hose size (ID): 10mm (3/8"). Air pressure: 90psi. Air consumption: 4cfm*. Sound...
KBE270-2040N
KOBE KBE270-2040N GES2506L 6mm EXTENDED SPINDLE DIE GRINDER
Kobe™ KBE270-2040N Extended Spindle Die Grinder GES2506L For extra reach in "hard to get at" areas, extended spindle housing allowing two-handed operation, rear exhaust, safety lever throttle. Collet size: 6mm. Air inlet thread: 1/4" NPT. Minimum air hose size (ID): 10mm (3/8"). Air pressure: 90psi. Ai...
KBE270-2050P
KOBE KBE270-2050P GA1011L 100mm/4" ANGLE GRINDER
Kobe™ KBE270-2050P 100mm (4") Angle Grinder GA1011L Adjustable safety guard, safety lever throttle. Supplied with auxiliary side handle, flanges and spanners, lightweight and compact. 100 x 3 x 16mm cut-off disc. Air inlet thread: 1/4¡¨ NPT. Spindle thread: 3/8¡¨ - 24. Minimum air hose size: 10mm (3/8¡¨)...
KBE270-2060Q
KOBE KBE270-2060Q GA1211L 115mm/4.1/2" ANGLE GRINDER
KOBE KBE270-2060Q Angle Grinder, 115mm GA1211L Suitable for grinding, cutting-off and sanding. Safety lever throttle. Supplied with auxiliary side handle, flanges and spanners. 115 x 3 x 22mm cut off disc. Air inlet thread: 1/4¡¨ NPT. Spindle thread: M10 x 1.5mm. Minimum air hose size: 10mm (3/8¡¨). Air press...
KBE270-2070R
KOBE KBE270-2070R GA1807L 180mm HEAVY DUTY ANGLE GRINDER
KOBE KBE270-2070R 180mm Heavy Duty Angle Grinder GA1807L Supplied with front exhaust, safety lever throttle, auxiliary side handle and adjustable safety guard. For grinding only Free speed: 7000rpm. Grinding disc size: 180x6.3x22.2mm. Air inlet thread: 1/4" NPT. Air hose size (ID): 10mm. Air pressure: 90PSI. Air c...
 21/ 72

 << Prev 1 2 3 4 Next >>

¡@
¡@
 
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@

¡@

Daypower 3 Ton Pallet Truck