Model

Products

Item No & Description

KENNEDY KEN503-7500K 120mm GRID PANEL BEATINGDOLLY

Kennedy KEN503-7500K Panel Beating Dolly Grid Dolly Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish. For shrinking work. With a large crowned grid face on the surface and a plain flat face on the base this dolly, combined with a shrinking hammer and ...

KENNEDY KEN503-7520K 758mm DOUBLE ENDED HAND PANEL BEATING DOLLY

Kennedy KEN503-7520K Panel Beating Dolly Double-End Hand Dolly Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish. For reshaping crowned panels and general panel beating.

KENNEDY KEN503-7540K 64mm ULTILITY PANEL BEATING DOLLY

Kennedy KEN503-7540K Panel Beating Dolly Utility Dolly Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish. Double-sided multi-purpose. Use the edge most suited to the size and shape of a damaged flange.

KENNEDY KEN503-7560K 120mm LOW CROWN TOE PANEL BEATING DOLLY

Kennedy KEN503-7560K Panel Beating Dolly Toe Dolly (Low Crown Dolly) Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish. For reshaping. Can be used in the hand to deliver a series of blows to the underside of the panel. Long crown enables use in hard to...

KENNEDY KEN503-7580K 132mm CURVED PANEL BEATING DOLLY

Kennedy KEN503-7580K Panel Beating Dolly Curved Dolly Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish. For raising low spots on panels. The edge can also be used to restore the shape of a roof and reform beads.

KENNEDY KEN503-7600K 81mm HEEL PANEL BEATING DOLLY

Kennedy KEN503-7600K Panel Beating Dolly Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish. For general reshaping of contoured panels, raising low spots and general panel beating.

KENNEDY KEN503-7650K PANEL BEATING SET 7-PIECE

Kennedy KEN503-7650K 7-Piece Panel Beating Set Drop forged, high carbon steel hammers with ground heads and cheeks. Hickory, octagonal section shafts. 1x: curved, utility, heel and toe dolly. 1x: 12oz shrinking hammer and flat faced bumping hammer, 1x 10oz round finishing pick. Supplied in a high quality fitted...

KENNEDY KEN503-7710K PANEL SEAM SPLITTER SET 3-PCE

Kennedy KEN503-7710K 3 Piece Panel Seam Splitter Set Ideal for separating spot-welded panels during repairs. Stainless steel coated chrome vanadium with through tang shafts allow use with hammers. Dual material soft grip handles for comfort and control. Includes 90¢X, curved and straight seam splitters. Cushioned handl...

KENNEDY KEN503-7800K MAGNETIC WING COVER 1100mmx400mm

Kennedy KEN503-7800K Magnetic Wing Cover Designed to be used in the workshop to protect car wings when working. Manufactured from heavy duty vinyl with a soft backing to prevent any scratching or marking of paintwork when in use. The cover is held in place by magnets stitched into the material. Folds to a quart...

KENNEDY KEN503-8020K OXYGEN SENSOR SOCKET SET3-PCE

Kennedy KEN503-8020K Oxygen, "EGO", "O2", "Lambda" Sensor Socket set Three piece universal set. Essential for servicing today's computer-controlled vehicle systems. Easily removes exhaust gas oxygen sensors (known as ¡¥EGO¡¦, ¡¥O2¡¦ or ¡¥Lambda¡¦ sensors), vacuum switches and pressur, Vauxhe switches. Als...

KENNEDY KEN503-8220K 2000KG POLYPROPYLENE TOWROPE

Kennedy KEN503-8220K 2000kg Tow Rope Model TRP200 Zinc plated steel safety hook. Looped one end. Manufactured from tough high visibility polypropylene. On tow sign. Manufactured to BS AU 187 1983. Length: 3.6m.

KENNEDY KEN503-8240K 4000KG PROFESSIONAL ELASTICATED TOW ROPE

Kennedy KEN503-8240K 4000kg Elasticated Tow Rope Model TRE400 Two zinc plated steel safety hooks. Elasticated core minimises drag on overrun. Heavy duty stitched webbing. On tow sign. Manufactured to BS AU 187 1983. Extended length: 4m.

KENNEDY KEN503-8400K WARNING TRIANGLE

Kennedy KEN503-8430K Deluxe Type Tyre Pressure Gauge Manufacturers recommended pressures are based on cold tyre readings. This pressure gauge has a long body, ideal for use on cars, vans, lorries, plant and equipment. It is very robust in construction and has a maximum pressure reading of 120psi.

KENNEDY KEN503-8430K UNIVERSAL DELUXE TYRE PRESSURE GAUGE

Kennedy KEN503-8430K Deluxe Type Tyre Pressure Gauge Manufacturers recommended pressures are based on cold tyre readings. This pressure gauge has a long body, ideal for use on cars, vans, lorries, plant and equipment. It is very robust in construction and has a maximum pressure reading of 120psi.

KENNEDY KEN503-8440K DIAL TYPE TYRE PRESSURE GAUGE

Kennedy KEN503-8450K Tyre Tread Depth Gauge This handy sized tyre depth gauge is graduated in mm and 1/32¡¨ and comes with a pen type pocket clip.

KENNEDY KEN503-8450K TYRE TREAD DEPTH GAUGE

Kennedy KEN503-8450K Tyre Tread Depth Gauge This handy sized tyre depth gauge is graduated in mm and 1/32¡¨ and comes with a pen type pocket clip.

KENNEDY KEN503-8460K PENCIL TYPE PRESSURE GAUGE

Kennedy KEN503-8460K Pencil Type Tyre Pressure Gauge This push-on gauge is suitable for cars, vans and light commercials, where readings of up to 120psi are necessary. It is of chrome plated brass contruction with a pen type pocket clip.

KENNEDY KEN503-8480K WORKSHOP AIR LINE GAUGE & PUSH-ON CONNECTOR

Kennedy KEN503-8480K Heavy Duty Dial Type Tyre Inflator TPG170 This push-on type tyre inflator is robust and has a dial type pressure gauge reading up to a maximum of 170psi. The pressure gauge is protected from accidental damage by a rubber shock guard. Heavy duty corrosion-resistant body with steel operating lever, ...

KENNEDY KEN503-8600K 13LTR PARTS WASHER BENCHSTANDING

Kennedy KEN503-8600K Parts Washer - Bench Standing Used in garage, workshop and industrial applications for degreasing components for inspection and prior to assembly. Recirculated cleaning fluid is filtered before entering the pump and being directed over the workpiece. Flexible chrome finish metal delivery ho...

KENNEDY KEN503-8640K 50LTR PARTS WASHER FLOORSTANDING

Kennedy KEN503-8640K Parts Washer - Floor Standing Used in garage, workshop and industrial applications for degreasing components for inspection and prior to assembly. Recirculated cleaning fluid is filtered before entering the pump and being directed over the workpiece. Flexible chrome finish metal delivery ho...

KENNEDY KEN503-8710K GLASS RUN CHANNEL CLEANER 260mm

Kennedy KEN503-8710K Glass Run Channel Cleaner Automotive Glass Run Channel Cleaners are for the fast removal of glass, chips and debris from run channels on side windows. Suitable for unhooking locking weather strips around windscreens, with a long shaft for reaching deep into door recess. Manufactured from ha...

KENNEDY KEN503-8720K GLASS RUN CHANNEL CLEANER 330MM

Kennedy KEN503-8720K Glass Run Channel Cleaner Automotive Glass Run Channel Cleaners are for the fast removal of glass, chips and debris from run channels on side windows. Suitable for unhooking locking weather strips around windscreens, with a long shaft for reaching deep into door recess. Manufactured from ha...

KENNEDY KEN503-8730K GLASS RUN CHANNEL CLEANER 610mm

Kennedy KEN503-8730K Glass Run Channel Cleaner Automotive Glass Run Channel Cleaners are for the fast removal of glass, chips and debris from run channels on side windows. Suitable for unhooking locking weather strips around windscreens, with a long shaft for reaching deep into door recess. Manufactured from ha...

KENNEDY KEN503-8760K CURVED RUBBER HOOK TOOL 230mm LENGTH

Kennedy KEN503-8760K Automotive Curved Hook Tools Curved hook tools are for inserting and removing rubber seals and gaskets, they feature a long shaft and curved head for smooth operation in both directions. Manufactured from hardened and tempered chrome vanadium steel with a comfort grip.

KENNEDY KEN503-8770K CURVED RUBBER HOOK TOOL 295mm LENGTH

Kennedy KEN503-8770K Automotive Curved Hook Tools Curved hook tools are for inserting and removing rubber seals and gaskets, they feature a long shaft and curved head for smooth operation in both directions. Manufactured from hardened and tempered chrome vanadium steel with a comfort grip.

KENNEDY KEN503-8800K SINGLE SPEED HAND PUMP 700 BAR 350CC (1/4" NPT)

Kennedy KEN503-8800K Single Speed Hydraulic Hand Pumps Rugged construction with an internal overload valve, a pressure rating of 10,000 PSI (700 Bar) and a 1/4 NPT thread size. Operates in a vertical and horizontal position.