Kennedy KEN503-3480K
Slide
Hammer Puller Set 16
pce
Multi-function
Fully
hardened and chromed
carbon steel slide
hammer with a 1.2kg
weight.
Slide
hammer design for
removing bearings
from blind housings.
Suitable for use
where a shaft or
other solid surface
is not available for
a thrust bolt or
hydraulic ram to
push against. The
bearing is removed
by the impact action
of the slide hammer
weight hitting the
stop at the end of
the bar. The puller
legs are securely
located on the
bearing by screwing
down the tapered nut
to lock the arms in
position. Blow
moulded storage
case.
Contents: 1x T-bar.
1x hammer. 1x two
jaw head. 1x three
jaw head. 1x leg
locking nut. 1x grip
wrench adaptor. 1x
tapping adaptor and
hook. 2x axle
pullers. 3x 120mm
puller legs, 3x
screw and nut
assemblies. 1x blow
moulded storage
case.