Kennedy KEN503-2940K
Four
different honing
tools in on
Cylinder Hone
For
honing of brake
cylinders and piston
bores with
capacities between
19 - 68mm. Self
aligning flexible
shaft and leg
assembly for smooth
operation at all
speeds. Honing
diameter and
pressure is adjusted
via a simple, spring
and cone mechanism.
Suitable for use
with a variable
speed electric or
air drill and fits
into all 3 jaw
chucks. Supplied
complete with a
medium grade stone
set. For storage
purposes legs are
retained in position
by a triangular
clip. This can be
removed using long
nose pliers or
tweezers and should
be retained for
further use.
Replacement stone
sets available. Use
brake fluid for
cutting lubricant.
Overall length:
200mm