HIGHWAY MARKETING SDN. BHD.  (496530-A)
Sibu Head Office: No.33, Long Bridge Road, Mini Post Ulu Lanang,  P.O.Box 8042, 96008 Sibu, Sarawak, Malaysia. Tel: +6084-313741, 318081  Fax: +6084-313749
　 E-mail: highwaysibu@gmail.com / sales.highwaysibu@gmail.com
Bintulu Branch:
Shoplot 239 (8390), Ground Floor, Bintulu Sentral, Phase 2, Tg. Kidurong,
97000 Bintulu, Sarawak, Malaysia. Tel: +6086-344341 Fax: +6086-344741 
E-mail: highwaybintulu@gmail.com
Miri Branch:
Lot 679, Ground Floor, Jalan Permaisuri, 98000 Miri, Sarawak, Malaysia.
Tel: +6085-434741, 437741 Fax: +6085-427749  E-mail: highwaymiri@gmail.com
+60198899341 HighwaySibu

　 　 　
　 　 　 　 　 　

Search by Category

Home
Company Profile
Action socket
AGP Power Tools
Akita Chain Block
Akita Lever Block
Comet High Pressure Cleaner 
Dynatool Hand Tools
Daypower Tools & Machineries
Einhell Power Tools
Hilti Tools
Air Cooler
Kennedy Tools
Kennedy Catalog
　 Cutting tools
　 Abrasives & Power Tools
　 Precision & Laboratory Equipment
　 Workshop Equipment
　 Hand Tools
　 Adjustable wrench
　 Automotive
　 Cold Chisel & Pry Bar
　 Spirit Levels
　 Plastering Tools & Trowels
　 Crimping Tools
　 Wire Stripping Tools
　 Soldering Tools
　 Multi-meter
　 Engineering's Hand Tools
　 Gardening & Contractor 's Tools
　 Garden Watering Products
　 Hammers & Axes
　 Soft Faced Hammer
　 Hammer Shafts
　 File Handle
　 Scissors & Decorating Tools
　 Insulated Service Tools
　 Tape Measurers
　 Knife
　 Saw Frames
　 Clamps
　 Fluid Handling & Lubricating
　 Sheet Metal Working Tools
　 Magnetic Tooling
　 Torque Tools
　 Nut Spinners
　 Pliers & Grips
　 Punches & Stamp
　 Stencils
　 Riveting Tools
　 Screwdrivers
　 Screwdriver bits
　 Non-Sparking Tools
　 Black Spanner & Scaffolding Tools
　 Bolt Cutter
　 Drawer Cabinets
　 Tool Pouches & Tool Rolls
　 Tools Bags & cases Boxes
　 Roller Cabinet & Tool Chests
　 Tool Kits & Tool Control
　 Woodworking Tools
　 Hexagon Keys
　 Hexagon Ball Drivers
　 Torx keys
　 Lubricants & Chemical Products
　 Welding
　 Maintenance & Personal Protection
Sealey Tools & Equipment
Lubricating Equipment
MP Lubricants
Metabo Power Tools
Mega Garage Equipment
Personal Safety Products
Safety Shoes
Welding Machine
Welding Consumable 
Expo Photo
Feed Back Form
New Products
Concept store investment
　 　
　
　
Introduction & IndexCutting ToolsAbrasives and Power ToolsPrecision & Laboratory EquipmentWorkshop EquipmentHand toolsFastenersLubricants & Chemical ProductsOffice Supplies & StationeryWeldingMaintenance & Personal ProtectionService & Support
　

　

Engineering's Hand Tools

　

Model

Products

Item No & Description

KEN518-0030K

KENNEDY KEN518-0030K SPRING TYPE DIVIDERS-SOLID NUT 75mm (3")
KEN518-0030K Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the...
KEN518-0040K

KENNEDY KEN518-0040K SPRING TYPE DIVIDERS-SOLID NUT 100mm (4")
KEN518-0040K Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the...
KEN518-0060K

KENNEDY KEN518-0060K SPRING TYPE DIVIDERS-SOLID NUT 150mm (6")
KEN518-0060K Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the...
KEN518-0080K

KENNEDY KEN518-0080K SPRING TYPE DIVIDERS-SOLID NUT 200mm (8")
KEN518-0080K Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the...
KEN518-0100K

KENNEDY KEN518-0100K SPRING TYPE DIVIDERS-SOLID NUT 250mm (10")
KEN518-0100K Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the...
KEN518-0120K

KENNEDY KEN518-0120K SPRING TYPE DIVIDERS-SOLID NUT 300mm (12")
KEN518-0120K Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the...
KEN518-0230K

KENNEDY KEN518-0230K SPRING TYPE INSIDE CALIPER-SOLID NUT 75mm (3")
KEN518-0230K Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting...
KEN518-0240K

KENNEDY KEN518-0240K SPRING TYPE INSIDE CALIPER-SOLID NUT 100mm (4")
KEN518-0240K Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting...
KEN518-0260K

KENNEDY KEN518-0260K SPRING TYPE INSIDE CALIPER-SOLID NUT 150mm (6")
KEN518-0260K Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting...
KEN518-0280K

KENNEDY KEN518-0280K SPRING TYPE INSIDE CALIPER-SOLID NUT 200mm (8")
KEN518-0280K Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting...
KEN518-0300K

KENNEDY KEN518-0300K SPRING TYPE INSIDE CALIPER-SOLID NUT 255mm (10")
KEN518-0280K Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting...
KEN518-0320K

KENNEDY KEN518-0320K SPRING TYPE INSIDE CALIPER-SOLID NUT 305mm (10")
KEN518-0280K Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting...
KEN518-0430K

KENNEDY KEN518-0430K SPRING TYPE OUTSIDE CALIPER-SOLID NUT 75mm-3"
KEN518-0430K Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting...
KEN518-0440K

KENNEDY KEN518-0440K SPRING TYPE OUTSIDE CALIPER-SOLID NUT 100mm-4"
KEN518-0440K Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting...
KEN518-0460K

KENNEDY KEN518-0460K SPRING TYPE OUTSIDE CALIPER-SOLID NUT 150mm-6"
KEN518-0460K Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting...
KEN518-0480K

KENNEDY KEN518-0480K SPRING TYPE OUTSIDE CALIPER-SOLID NUT 200mm-8"
KEN518-0480K Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting...
KEN518-0500K

KENNEDY KEN518-0500K SPRING TYPE OUTSIDE CALIPER-SOLID NUT 255mm-10"
KEN518-0500K Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting...
KEN518-0520K

KENNEDY KEN518-0520K SPRING TYPE OUTSIDE CALIPER-SOLID NUT 305mm-12"
KEN518-0520K Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting...
KEN518-0530K

KENNEDY KEN518-0530K 4" FIRM TYPE CALIPER WITH ADJUST. POINT
KEN518-0530K Firm Joint Calipers Manufactured from high quality steel, with a polished finish. Consisting of two legs which are held together by a...
KEN518-0540K

KENNEDY KEN518-0540K 6" FIRM TYPE CALIPER WITH ADJUST. POINT
KEN518-0540K Firm Joint Calipers Manufactured from high quality steel, with a polished finish. Consisting of two legs which are held together by a...
KEN518-0550K

KENNEDY KEN518-0550K FIRM TYPE CALIPER WITH SPUR 130mm (5")
KEN518-0550K Manufactured from high quality steel, with a polished finish. Consisting of two legs which are held together by a large nut and screw to...
KEN518-0580K KENNEDY KEN518-0580K SET - 6" DIVIDERS, 6" I/S & O/S CALIPERS (3 pcs)
KEN518-0580K All three calipers are manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs...
KEN518-4150K

KENNEDY KEN518-4150K ADJUSTABLE STEEL SQUARE 100MM/4"
KEN518-4150K Made from hardened steel and precision ground. Supplied with three fully adjustable blades which can be set and fixed into position using...
KEN518-4160K KENNEDY KEN518-4160K ADJUSTABLE STEEL SQUARE 150MM/6"
KEN518-4160K Made from hardened steel and precision ground. Supplied with three fully adjustable blades which can be set and fixed into position using...
KEN518-4620K

KENNEDY KEN518-4620K 75mm (3") ENGINEERS SQUARE
KEN518-4620K Engineer’s Squares Manufactured from hardened and tempered steel. The edges are ground parallel to give the square an exact right angle on both the inside and outside of the stock and blade. Squareness tolerance: 75, 100 and 150mm = ±0.030mm. 225 and 300mm = ±0.040mm.
KEN518-4640K KENNEDY KEN518-4640K 100mm (4") ENGINEERS SQUARE
KEN518-4640K Engineer’s Squares Manufactured from hardened and tempered steel. The edges are ground parallel to give the square an exact right angle on both the inside and outside of the stock and blade. Squareness tolerance: 75, 100 and 150mm = ±0.030mm. 225 and 300mm = ±0.040mm.
KEN518-4660K

KENNEDY KEN518-4660K 150mm (6") ENGINEERS SQUARE
KEN518-4660K Engineer’s Squares Manufactured from hardened and tempered steel. The edges are ground parallel to give the square an exact right angle on both the inside and outside of the stock and blade. Squareness tolerance: 75, 100 and 150mm = ±0.030mm. 225 and 300mm = ±0.040mm.
KEN518-4680K

KENNEDY KEN518-4680K 225mm (9") ENGINEERS SQUARE
KEN518-4680K Engineer’s Squares Manufactured from hardened and tempered steel. The edges are ground parallel to give the square an exact right angle on both the inside and outside of the stock and blade. Squareness tolerance: 75, 100 and 150mm = ±0.030mm. 225 and 300mm = ±0.040mm.
KEN518-4700K KENNEDY KEN518-4700K 200mm (12") ENGINEERS SQUARE
KEN518-4700K Engineer’s Squares Manufactured from hardened and tempered steel. The edges are ground parallel to give the square an exact right angle on both the inside and outside of the stock and blade. Squareness tolerance: 75, 100 and 150mm = ±0.030mm. 225 and 300mm = ±0.040mm.
OXD340-0030K

OXFORD OXD340-0030K 75mm (3") ENGINEERS SQUARE BS.939 GRADE B
OXD340-0030K Engineer's Squares Manufactured from hardened steel that has been precisely ground to produce parallel edges so that the square has an exact right angle on both the inside and outside of the stock and blade, to ensure accuracy. Conforms to BS939 Grade B.
OXD340-0040K OXFORD OXD340-0040K 100mm (4") ENGINEERS SQUARE BS.939 GRADE B
OXD340-0040K Manufactured from hardened and tempered steel. The edges are ground parallel to give the square an exact right angle on both the inside...
KEN340-0060K

OXFORD OXD518-0060K 150mm (6") ENGINEERS SQUARE BS.939 GRADE B
OXD340-0060K  Engineer's Squares Manufactured from hardened steel that has been precisely ground to produce parallel edges so that the square has an exact right angle on both the inside and outside of the stock and blade, to ensure accuracy. Conforms to BS939 Grade B.
KEN340-0090K

OXFORD OXD340-0090K 225mm (9") ENGINEERS SQUARE BS.939 GRADE B
OXD340-0090K  Engineer's Squares Manufactured from hardened steel that has been precisely ground to produce parallel edges so that the square has an exact right angle on both the inside and outside of the stock and blade, to ensure accuracy. Conforms to BS939 Grade B.
KEN340-0120K OXFORD OXD340-0120K 300mm (12") ENGINEERS SQUARE BS.939 GRADE B
OXD340-0120K  Engineer's Squares Manufactured from hardened steel that has been precisely ground to produce parallel edges so that the square has an exact right angle on both the inside and outside of the stock and blade, to ensure accuracy. Conforms to BS939 Grade B.

　

Other Products

　

Arc (MMA) Welder

　

Hand Tools

　

Head Protection

　

Precision & Laboratory

　

Workshop Equipment